Tufted Headboard How To Make It Own Your Own Tutorial Diy Using a measuring tape and permanent marker, draw a small dot for each button spot. start the first row about 2.5 inches below the top of the headboard. determine how far apart you want each button. after marking your first row, line out another row about 4.5 inches below it. Start to finish to make your own upholstered, tufted style headboard. for more information on how we made this, check out my blog here: checkinginwith.
Tutorial How To Make A Fabric Headboard Wrap the foam in a layer of batting. spray with adhesive, then attach another layer of batting. pull the layers taut, and join them to the frame with staples. trim excess batting with scissors. once again, find the placement of each tuft hole with an upholstery needle and poke through with scissors. Attach buttons. cut a 2 foot length of florists wire. thread the needle with the florists wire by a couple of inches and bend the wire back. insert the needle through the hole and push through the foam and fabric. run the needle and wire through the back of the button, then back through the fabric and headboard. Step 5: attach the upholstery foam and batting to the headboard frame. lay the headboard frame flat (front side up), and apply a generous coat of spray adhesive to the pegboard, especially at the edges. *you'll want to work quickly so the adhesive doesn't dry. line up the edges of the upholstery foam with the edges of the diy headboard frame. Materials needed for a queen size channel tufted headboard. our queen sized headboard is 2″ wider than the typical 62″ coming in at 64″ wide. you will need: 4′ x 8′ piece of plywood cut into 16″ x 48″ panels, quantity 4. 24″ x 72″ upholstery foam, quantity 2. 90″ x 108″ queen sized roll of quilt batting, quantity 1.
Comments are closed.