10 Steps To Accurate Manual Blood Pressure Measurement Blog Suntech 1. a quality stethoscope. 2. an appropriately sized blood pressure cuff. 3. a blood pressure measurement instrument such as an aneroid or mercury column sphygmomanometer or an automated device with a manual inflate mode. step 2 prepare the patient: make sure the patient is relaxed by allowing 5 minutes to relax before the first reading. 10 steps to accurate manual bp measurement hot. download a free e book as a helpful guide to the 10 steps of accurate manual blood pressure measurement, courtesy of suntech medical! click on ebook image below to begin download.
10 Steps To Accurate Manual Bp Measurement Suntech Medical 2. rest for 5 minutes before taking your blood pressure. this will help ensure that you have an accurate reading. 3. sit in a chair with your feet flat on the ground and your back supported. 4. place the cuff on your bare skin, making sure that the bottom of the cuff is placed 1 2 inches above your elbow. 5. Although auscultatory measurement has been the standard system for manual blood pressure mensuration for override 50 years, surveys indicate that physicians rarely follow the well published guid although auscultatory measurement is been the standard method for manual line impression measurement for over 50 aged, polls indicate so physicians. Ensure good placement of the stethoscope. position your stethoscope’s diaphragm over the brachial artery, just below the cuff’s edge. inflate the cuff. quickly inflate the cuff to 20 to 30 mmhg above the estimated systolic pressure you just obtained. slowly deflate the cuff. To know your value, you must take a manual or automatic measurement of your blood pressure. the american heart association classifies the results into five ranges : normal: blood pressure numbers below 120 80 mmhg are considered within the normal range. in this case, it is recommended to maintain healthy habits such as following a balanced diet.
Comments are closed.