2005 F150 Bed Removal

2005 F150 Bed Removal Youtube 00:00 intro1:36 six torx bolts removal06:41 fuel filler neck bolts removal08:48 removal of vent hose from bed and disconnecting electrical plugs10:29 lifting. Ford f 150 removing a 6.5 ft bed 2005 f150.

Ford F150 Bed Removal 1) remove the screws holding the filler neck to the bed, 2) remove the tailgate, 3) remove all the screws holding the bed to the frame,'. 4) remove & unhook the taillights & make sure there is no wiring attached to the back of the bed, if so unhook, 5) either with help remove the bed, when we removed the bed from my old ranger i used an engine. Tips and tricks. Much cheaper too! last edited by badfish523; 02 20 2017 at 02:50 pm. 2004 2008 ford f150 bed removal tricks i am wanting to remove the bed on my 05 super crew. i see 2 braces on each side front and rear of wheel wells a tube coming out of the bottom of the bed going to a canister mounted on the frame so is that and my 3 screws inside the. To remove the bed, you'd need to disconnect the factory wiring connections to the taillight and license plate lights, then remove the 4 bolts that hold the bed to the frame. and a few buddies to lift it off. reply like. 03 12 2011, 07:06 pm. # 3.

2005 Ford F150 Truck Bed Replacement Much cheaper too! last edited by badfish523; 02 20 2017 at 02:50 pm. 2004 2008 ford f150 bed removal tricks i am wanting to remove the bed on my 05 super crew. i see 2 braces on each side front and rear of wheel wells a tube coming out of the bottom of the bed going to a canister mounted on the frame so is that and my 3 screws inside the. To remove the bed, you'd need to disconnect the factory wiring connections to the taillight and license plate lights, then remove the 4 bolts that hold the bed to the frame. and a few buddies to lift it off. reply like. 03 12 2011, 07:06 pm. # 3. Step 4: lifting the bed. lower the truck to the ground, and have one person on each bed’s corner. proceed to lift it straight up and then off the truck. place the bed on the sawhorses, and replace the gas cap. if you have doubts, here’s a good video for visual guidance. Doing a chevy today so i thought to post. 1999 to 2016 super duty bed bolt torx size i have been preparing to remove the bed on my 2001 regular cab (8' box) and was trying to find a bit to fit the bed bolts. i tried a t55 torx, but it was too large, and the t50, while it will engage the teeth, is too small.