A Guide To Changing Oil In Your Car Car Keys Step 6: fill it back up with oil. once you have replaced the oil filter and drain plug, reinstall your undertray and lower the car back to the ground. open the hood and remove the oil cap, which. Drain the old oil and replacing the filter. step 3: drain the oil. use the socket set to carefully loosen and remove the oil drain plug. allow the old oil to drain completely into the pan. make sure you set the drain plug aside, and wipe it off in preparation to re install it. step 4: remove the oil filter.
How To Change Your Oil Complete Guide Youtube Warm up the car for just a few minutes. this can be a quick trip around the block or up and back the road for about 5 minutes. this will allow the oil to warm up and circulate through the motor, making it easy flowing and faster to drain. allow the motor to cool, especially the exhaust system. this should be about 30 minutes or more. Unscrew the top from the oil jug and hold the bottle with the spout on top (facing you). holding the bottle this way will let the oil pour out more smoothly, without bubbling. turn the oil jug over in 1 swift motion, and stick the tip of the bottle into the engine’s fill hold. try to spill as little oil as possible. Step 4: remove oil drain plug. under the car, locate the oil drain plug. set a drain pan beneath the plug. use a drain pan designed to hold twice the capacity of oil in the engine's crankcase. once your drain pan is in place, remove the plug and set it someplace safe. it's a good idea to replace your drain plug gasket. Keep adding oil until the dipstick or sensor reads full, then replace the oil filler cap. start the car and take a peek underneath to see if there are any leaks. if not, then you’re done! make.
Comments are closed.