Audi Adaptive Lights Problem Solved Youtube If the adaptive headlights fail to adjust at all, there is a possibility that the one of the wires going to the adaptive headlight motor could have been pinched or torn. the only way to know for sure is to open up the headlight and check. first you'll need to unscrew and remove the headlight from the car. With your vag cable, go into the xenon headlights (55), and choose the measure block 2. you can see the current values being: my range was 68.7 up front, and 62.8 in the rear. my rear was fine so my problem was the front. when you get underneath the car and take off the wheel, you can see this:.
Audi Adaptive Light Defective A6 C6 Coding Programming Problem Solved A6 s6 (c6 platform) discussion adaptive lighting (aps) disable fix i can't take credit for this workaround, but wanted to share it since i did a lot of searching, , et al (and wasted a lot of time.) my 2008 a6 3.2l had the adaptive light defective message. i bought a replacement headlight on ebay (with. Software issues: in some cases, a software issue may cause the adaptive lights to malfunction. it can occur if a problem with the vehicle’s computer system or the software that controls the lights needs to be updated. control module failure: the control module receives input from the sensors and controls the adaptive lights. Problems with the motors responsible for adjusting the headlights can cause the adaptive lighting indicator warning light to turn on. it’s essential to address these issues as soon as possible. consult a qualified technician to diagnose the problem and perform the necessary repairs to ensure your audi’s adaptive light system functions. This is on a 2007 audi a6. common wiring problem if you are getting the adaptive light defective warning. this is on a 2007 audi a6.
Comments are closed.