Cold Process Soap Recipe Using Lard Besto Blog The recipe makes 750g of soap, but i have also included percentages if you wish to resize your batch. if you do, please do ensure that you re check your quantities using a lye calculator! please note that this soap is superfatted at 5%. lard (pig tallow) 250g (33.33%) rice bran oil 200g (26.67%) coconut oil 160g (21.33%). Stir the lye into the water until dissolved. note, the chemical reaction will cause it to heat up quickly. set aside to cool to about 120 130°f. melt the lard and olive oil in a small saucepan on the stove over medium heat. once melted, set aside to cool. add the melted fat and oil to a metal mixing bowl.
Cold Process Soap Recipe Using Lard Besto Blog Method. step 1: in a separate container, mix the clay with a couple of teaspoons of distilled water and set it aside for later. step 2: follow the steps above (for the no thrills lard soap) until you reach trace (step 7). once you have reached trace, stir in the clay followed by the essential oil. When all is melted, remove from heat (or microwave) and add the shea butter in small bits and stir until melted. then add your olive and castor oil, and your dispersed clay and give it a quick whiz with the stick blender. then pour in your lye solution. now for the mixing part. Creating a cold process soap recipe from scratch using lard is a great way to learn the basics of soap making and understand how different ingredients work together to create a great product. lard is a very popular ingredient for soap making because of its low cost and high fat content, which produces a luxuriously creamy lather. Once the fats and oils are melted, set the saucepan aside to cool along with the lye. once the lye and the fats are cooled to approximately 115 degrees or within ten degrees of each other, you can then mix them together. slowly pour the lye into the fats. using the immersion blender, mix the ingredients together.
Comments are closed.