Scuba Diving Swivel Pivot Pin Regulator Gauge Hp Spg Regulator Hose Do i need a swivel pin on every hose? #askmark #scuba @patrickmessina08 what brand of 6” hp hose and air spool would you recommend to use for connecting the. Mar 26, 2016. #3. that would be correct, the hp fitting is designed seal via the oring on the spool not at the mechanical thread interconnect. with o rings on outside of each end of the tube (spool) the pressure should not actually be present at the threaded coupling, other than a little bleed by on an o ring seal. op.
Scuba Diving Swivel Pin Gauge Hp Pin Ebay Should i change my regulator hoses every 5 years? #askmark #scuba @jeffmoyedo miflex hoses need to be replaced regularly? one service tech i spoke to said th. #askmark when diving with both an ai transmitter and an spg, with the ai transmitter using the hp port over your left shoulder so it is on the same side as your dive computer, how do you route the hose for the spg? is it an issue that the spg hose is coming from the right hp port but still needs to be on the left thigh d ring?. What length bcd hose do i need? #scuba #bcd #askmark ocea@scxbah #askmark what hose length would you recommend for bcds and drysuit lp inflators?#scuba #scub. #askmark buying a 12ltr scuba tank (e.g. faber steel cylinder)… i have an option for air or nitrox, if i want to use say standard air fill (21%) and then sometimes up to say 36% nitrox fill. do i need to specify an air or nitrox tank. can i use one tank for both air and up to 36% nitrox and what does the cylinder need to be (air or nitrox).
Comments are closed.