Honda Bf Efi 90hp Outboard Engine Service Arran Boats

Honda Bf Efi 90hp Outboard Engine Service Arran Boats Honda bf efi 90hp outboard engine service. 19 november 2016. this is not the usual size of outboard engine i deal with. the arran 16 only takes a 15hp max. this is a 2008 bf honda 90 efi. i am servicing this for a customer and will run through the procedure as i go. first thing was to obtain some background info from the owner and then order a. Check in with "the outboard whisperer", luke kirkby clark, as he takes you through the simple process of keeping your honda bf90 outboard engine serviced. it.

Servicing A 2008 Honda 90hp Bf Lrtu Arran Boats June 19, 2007. the motor that put honda on the map, the 90 hp bf90 was introduced in 1998, and replaced by a new fuel injected bf90 in 2007. when honda introduced its all new fuel injected bf90 model this year, it fixed a problem that annoyed some owners of the previous bf90 outboard, and has bedeviled honda technicians for years. Honda marine service & support. your honda outboard engine is designed to perform – but it also requires occasional maintenance in order to maintain its ongoing quality and reliability. honda dealers offer you the support, service and expertise to help keep your honda product performing year after year. location: national. enter a postal code. Jun 9, 2011. #1. my 2000 bf 90 is overheating. the problems started back in december. i removed and replaced the impeller. i removed and replaced the thermostat. i took apart the valves and cleaned them out. i took it to the honda dealer, and they said they cleaned out a poppet valve that was clogged. Make sure that you relieve fuel pressure before taking the cap off. there is a bolt in the center of the cap. cover with a rag to minimize fuel splash and remove that bolt. that is where the high pressure fuel gauge is connected. if you drain the vapor separator first, you will have less fuel mess. mike.

Honda Outboard Efi Bf75 90hp Service Kit вђ Pacermarine Jun 9, 2011. #1. my 2000 bf 90 is overheating. the problems started back in december. i removed and replaced the impeller. i removed and replaced the thermostat. i took apart the valves and cleaned them out. i took it to the honda dealer, and they said they cleaned out a poppet valve that was clogged. Make sure that you relieve fuel pressure before taking the cap off. there is a bolt in the center of the cap. cover with a rag to minimize fuel splash and remove that bolt. that is where the high pressure fuel gauge is connected. if you drain the vapor separator first, you will have less fuel mess. mike. Thank you for purchasing a honda outboard motor. this manual describes the operation and maintenance of the honda bf 75a and bf 90a outboard motors. all information in this publication is based on the latest product informa tion available at the time of printing. honda motor co., ltd. reserves the right to make changes at any time. This year, honda will have a new pup in its place, an all new bf90 ($9,585) that is an upgrade in every respect from its existing 90 hp outboard engine. like dogs, outboards age at an accelerated rate, and there were few older than the loyal but outdated honda bf90, a nine year old design still hanging around dealer showrooms last summer. this.