How To Effectively Use A Fire Extinguisher Flammatech Pass step 4: sweep from side to side at the base of the fire. use a sweeping motion from side to side to cover the base of the fire. continue extinguishing the fire until the fire is completely out. after the fire appears to be out, watch the area in case the fire breaks out again, and repeat use of the extinguisher if necessary. Squeeze the lever. the third step of pass is “squeeze.”. to release the extinguishing agent, squeeze the levers together with one hand while aiming the hose at the base of the fire with the other. apply slow and even pressure when you squeeze the levers. [6] to stop the extinguisher, let go of the levers.
How To Use A Fire Extinguisher Flame Safety Cornwall Fire A: aim the extinguisher nozzle on the hose low, toward the base of the fire. s: squeeze the handle or lever to discharge the extinguisher. s: sweep the nozzle back and forth. keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished. download steps. 4. A im: aim the nozzle or hose at the base of the fire, not the flames. effective fire extinguishing targets the fuel source, not the flames themselves. standing about 6 to 8 feet away from the fire is typically advised, but always maintain a safe distance to avoid harm. s queeze: squeeze the handle to release the extinguishing agent. Point the extinguisher’s nozzle at the base of the fire. squeeze the fire extinguisher’s handle to begin the flow of fire fighting agent. thomas hengge. squeeze the handle to activate the flow. Aim low: point the extinguisher nozzle or hose at the base of the fire, not at the flames. squeeze the lever: this will release the extinguishing agent. hold the extinguisher upright while operating. sweep from side to side: use a sweeping motion to cover the entire base of the fire until it is extinguished. continue spraying until the fire is.
How To Properly Use A Fire Extinguisher Safewise Point the extinguisher’s nozzle at the base of the fire. squeeze the fire extinguisher’s handle to begin the flow of fire fighting agent. thomas hengge. squeeze the handle to activate the flow. Aim low: point the extinguisher nozzle or hose at the base of the fire, not at the flames. squeeze the lever: this will release the extinguishing agent. hold the extinguisher upright while operating. sweep from side to side: use a sweeping motion to cover the entire base of the fire until it is extinguished. continue spraying until the fire is. Aim the nozzle or hose at the base of the fire from the recommended safe distance specified on the extinguisher tank. squeeze down on the operating lever to discharge the fire extinguishing agent. sweep the nozzle or hose from side to side until the fire is out. move forward or around the fire area as the fire diminishes. Stay at least 6–8 feet away from the fire when using an extinguisher. always position yourself with an exit at your back when fighting a fire. this ensures you have a clear escape route if the fire grows or the extinguisher runs out. never let the fire come between you and your exit.
Comments are closed.