How To Find Ac Drain Line Turn off the air conditioner to eliminate risk of electrical shock. locate the ac drain line access tee vent next to the indoor unit. remove the cap and pour 1 cup of vinegar down the drain line. wait for 30 minutes then flush the line using water. turn the ac unit back on. Turn off the ac’s power: working with water and electricity can be a dangerous combination. shut off the air conditioner’s power at the breaker before you get started. move the cap from the drain line: look for a cap at the top of the line. remove the cap so you can take a better look at the clog.
How To Install Ac Drain Line I pour a few cups of hot water down the drain, followed by a cup of vinegar and a half cup of baking soda. let the solution sit for about twenty minutes, then try using a plunger if the water still won't go down. tl;dr: you can create a diy chemical drain cleaner using vinegar and baking soda. 5. pour 1 cup (236.5 ml) of bleach into the hole to kill the mold and mildew. measure out 1 cup (236.5 ml) of bleach into a measuring cup with a pouring spout. pour it into the access hole and let it drain out the other side. [8] use a funnel to help you get all the bleach into the drain line if it is easier. 6. Step 2 check the drain pan. one of the first things the technician will do is locate the drain pain and check for standing water. if standing water is present, it can either be soaked up with rags or removed with a wet vac. the dry condensate pan should be thoroughly cleaned to help prevent the growth of mold. Cut the drain line. add a shut off valve at the air handler or furnace side. turn it to the off position. add a t on the opposite side, and insert a garden hose fitting into the top of the t. screw into the garden hose fitting a ¾” to ½” adapter, and screw into the adapter a short ½” threaded nipple.
How To Find Air Conditioner Drain Line Step 2 check the drain pan. one of the first things the technician will do is locate the drain pain and check for standing water. if standing water is present, it can either be soaked up with rags or removed with a wet vac. the dry condensate pan should be thoroughly cleaned to help prevent the growth of mold. Cut the drain line. add a shut off valve at the air handler or furnace side. turn it to the off position. add a t on the opposite side, and insert a garden hose fitting into the top of the t. screw into the garden hose fitting a ¾” to ½” adapter, and screw into the adapter a short ½” threaded nipple. Serving dallas, hiram, acworth, kennesaw & marietta, ga. helping thousands of people in the metro atlanta area, we’re able to provide you with the best heating and air conditioning service around. contact us either by using our convenient online form or by giving us a call at (770) 758 4552. we look forward to serving you with the best. Puddles of water: this is the most common sign of a clogged drain line. when the drain line is clogged, the condensate pan overflows, and water leaks out of the unit. you may see puddles of water around the indoor unit or outside near the condenser unit. moldy smell: the moisture from a clogged drain line can create a perfect breeding ground.
Comments are closed.