How To Light Or Relight Your Water Heater Pilot Youtube Turn off the gas. before you relight your pilot light, the first step is to turn off the gas. locate the gas valve on your hot water heater and turn it to the “off” position. wait approximately 10 minutes. this gives any gas in the area time to clear, which is important because the gas is highly flammable. Step 2: turn off the gas and wait 10 minutes for the gas to dissipate. before you even touch your heater’s pilot light, you need to turn off the gas to the unit using the gas knob you located in step 1. wait at least 10 minutes to give any gas built up in the lines a chance to dissipate.
How To Relight The Pilot Light On Your Gas Water Heater J Griffi 2. light the pilot burner. while holding down the pilot gas valve or the red button with one hand, you will use your other hand to quickly light the pilot. if you have a new style water tank with a built in ignition switch, press this button. you should hear a clicking noise until the pilot burner lights. [4]. Learn how to light or relight your water heater pilot with this easy video tutorial. avoid replacing parts and save money by following these simple steps. Turn the gas knob to “pilot,” press, and hold it down. this will start the flow of gas so you can light the flame. some water heaters have a separate button for pilot mode, usually a red one, which you’ll press and hold. while still holding the gas down, light that pilot. some water heaters have a red or black igniting button, and others. Let the water heater sit for 5 minutes to release gas from the system. turn the control switch to pilot light mode. press the red control button in for a few seconds and while pressing in, button every few seconds. listen for a click and the water heater status light should start blinking ignites. let go of the red control button.
Comments are closed.