How To Restore And Fix Mercruiser Gen 3 Cool Fuel Module And Upgraded To Quantum Fuel Systems Pump

How To Restore And Fix Mercruiser Gen 3 Cool Fuel Modul How to restore mercruiser gen 3 cool fuel module and upgraded to quantum fuel systems pump many easy steps to restored the module(( update!!! ))i don not rec. Jun 27, 2017. #2. blackened plugs is a over rich fuel mixture which can not be caused by the pump. the pump can output 60 psi pressure but only happens if something else fails like the fuel pressure regulator or a clog in the return system. other causes of black plugs is the map sensor, clogged flame arrestor, tps or vacuum leak.

Gen 3 Cool Fuel Module Mercruiser Offshoreonly Replacement kits complete gen iii module with pumps and filter 8m0047215. if you have 3 hoses coming from the supply hose coming out of the supply hose, you also need. three bib hose kit 865208t02. view attachment 30501. good news is that the new pump kit has a drain plug that is actually accesible,. 6. install the supplied hose clamps on the large cooling hoses and attach to the new orifice meter assembly, if replacing. 7. install the supplied hose clamps on the water hoses of the orifice meter assembly and connect the hoses to the inlet and outlet barbed fittings on the gen iii cool fuel module. 8. 8.1s v drives. re: mercruiser gen iii cool fuel module. i have a 2006 34 sundancer w 8.1s. had same issue w paint. they found it in. the regulators, fuel pumps, module, filters and injector screens totally clogged the entire. system. apparently came from the fuel module. they appear to be painted on inside. Hi as the title says i have some questions regarding the mercury gen 3 cool fuel module and the new replacement module. i have found some signs of the dreaded paint pealing when i removed the assembly to look at my fuel filters as well as on the bottom opening of my fuel pressure regulator. i have a 2006 496 mag ho bbc engine with low hours on.

Gen 3 Cool Fuel Module Mercruiser Offshoreonly 8.1s v drives. re: mercruiser gen iii cool fuel module. i have a 2006 34 sundancer w 8.1s. had same issue w paint. they found it in. the regulators, fuel pumps, module, filters and injector screens totally clogged the entire. system. apparently came from the fuel module. they appear to be painted on inside. Hi as the title says i have some questions regarding the mercury gen 3 cool fuel module and the new replacement module. i have found some signs of the dreaded paint pealing when i removed the assembly to look at my fuel filters as well as on the bottom opening of my fuel pressure regulator. i have a 2006 496 mag ho bbc engine with low hours on. Mercruiser 8m0047215 bravo gen iii cool fuel pump module service kit complete. this cool fuel supply module replacement kit contains: 1 gen iii cool fuel module assembly. 2 plastic barbed hose connector fittings (3 8 18) #22 8m2010476. 1 adapter, hex 3 8" #88517. Allow the engine to cool completely and release all fuel servicing any part of the fuel system. always protect eyes and skin from pressurized fuel and vapors. remove and retain the engine cover. disconnect the negative (–) battery cable from the battery. disconnect the positive ( ) battery cable from the battery.