How To Service The Cooling System On The Mini One 2001 To 2006

how To Service The Cooling System On The Mini One 2001 To 2006 Youtube
how To Service The Cooling System On The Mini One 2001 To 2006 Youtube

How To Service The Cooling System On The Mini One 2001 To 2006 Youtube Do you need to service the cooling system on your mini one 2001 to 2006 but don't know where to start? this video tutorial shows you step by step how to do. Step 4 – refill cooling system. after all of the coolant has drained from the cooling system, proceed with refilling the system. reinstall the lower radiator hose and hose clamp. fill the coolant expansion tank with either pre diluted antifreeze coolant, or a 50 50 mix of distilled water and coolant concentrate.

mini Cooper coolant Change R50 R52 R53 2001 2006 Pelican Parts Diy
mini Cooper coolant Change R50 R52 R53 2001 2006 Pelican Parts Diy

Mini Cooper Coolant Change R50 R52 R53 2001 2006 Pelican Parts Diy Step 2 – remove the front bumper. open the hood and turn the wheel full lock to one side. remove the 8 10 screws at the bottom of the front bumper near the grille using a phillips head screwdriver. remove the two 8mm bolts in each wheel well area near the headlights. you can reach these bolts from the bottom. Easy 2 min bleeding routine common faults. Using a 50% distilled water 50% engine coolant mix, slowly fill the expansion tank until the coolant level indicator reaches max. the level indicator diagram is located on the tank (green arrows). reference this when filling to obtain the correct level. trapped air is common when filling a cooling system and can result in improper cooling. Hook in the radiator and a c condenser. reconnect the radiator hoses to the radiator. reinstall the push pins that secure the radiator to the chassis. reinstall the front bumper crash bar and then the rest of the front bumper assembly. top off the cooling system at the radiator and overflow tank with 50 50 coolant.

mini mini 2001 2006 1 6 Fluid Level Checks Haynes Publishing
mini mini 2001 2006 1 6 Fluid Level Checks Haynes Publishing

Mini Mini 2001 2006 1 6 Fluid Level Checks Haynes Publishing Using a 50% distilled water 50% engine coolant mix, slowly fill the expansion tank until the coolant level indicator reaches max. the level indicator diagram is located on the tank (green arrows). reference this when filling to obtain the correct level. trapped air is common when filling a cooling system and can result in improper cooling. Hook in the radiator and a c condenser. reconnect the radiator hoses to the radiator. reinstall the push pins that secure the radiator to the chassis. reinstall the front bumper crash bar and then the rest of the front bumper assembly. top off the cooling system at the radiator and overflow tank with 50 50 coolant. Figure 12 (r50 r52 r53 cooper and cooper s) re connect the lower radiator hose and fill the coolant expansion tank with a 50 50 mixture of antifreeze coolant and distilled water. start the engine and keep an eye on the max min marks on the side of the tank. the coolant level should drop as the engine warms up. Mini recommends the coolant system drain and refill every 4 years as listed in the 'additional service items' section of inspection ii. this will maximize longevity of the cooling system and its components. the following procedure is for 2002 2006 r50 mini cooper and r53 cooper s, and 2005 2008 r52 mini cooper and s convertibles.

Comments are closed.