Intravenous Iv Cannulation Osce Guide Youtube Hi, future doctors here!we’re back with a tutorial for one of the most common procedures performed in the clinic, iv cannulation. it’s used to deliver medica. This video provides a step by step guide to performing intravenous (iv) cannulation in an osce station.you can read our step by step osce guide alongside the.
Iv Cannulation Osce Tutorial Youtube For more video tutorials, high yield revision qbanks and support from our online community, sign up at surgicalteaching . use coupon code styo. Areas in which two veins join should be avoided where possible, as valves are often present. 2. position the patient’s arm in a comfortable extended position that provides adequate access to the planned cannulation site. 3. apply the tourniquet approximately 4 5 finger widths above the planned cannulation site. 4. 1. open the required intravenous fluid bag packet and use an alcohol wipe for 15 30 seconds to decontaminate the ports. 2. attach a hypodermic needle (23g to 25g) to the medication syringe. 3. inject the medication into the infusion port on the fluid bag, then dispose of the needle in the sharps bin. 4. Check and flush the iv cannula. 1. adequately expose the patient’s cannula for the procedure. 2. inspect the cannula site for any evidence of leakage, phlebitis or inflammation. 3. clean the needle free port of your cannula with your alcohol wipe. 4. connect the flush to the port and slowly inject the normal saline into the cannula.
Establishing An Iv Access Cannulation Osce Guide Nursing Skills 1. open the required intravenous fluid bag packet and use an alcohol wipe for 15 30 seconds to decontaminate the ports. 2. attach a hypodermic needle (23g to 25g) to the medication syringe. 3. inject the medication into the infusion port on the fluid bag, then dispose of the needle in the sharps bin. 4. Check and flush the iv cannula. 1. adequately expose the patient’s cannula for the procedure. 2. inspect the cannula site for any evidence of leakage, phlebitis or inflammation. 3. clean the needle free port of your cannula with your alcohol wipe. 4. connect the flush to the port and slowly inject the normal saline into the cannula. Intravenous cannulation is a process by which a small plastic tube (a cannula) is inserted into a peripheral vein. the subsequent venous access can be used for the administration of fluids, medication and nutrition. in some cases, blood samples can also be obtained from the cannula. the process of cannulation can be divided into four steps. Re apply the tourniquet and identify your vein. pick up the cannula, open out the wings and remove the needle cap. anchor the vein in place by gently pulling on the skin distal to the vein with your non dominant hand. insert the cannula into the vein at an angle of 15 45° to the skin, with the bevel facing upwards.
Comments are closed.