Making Plain Lard Soap Youtube Method. step 1: in a separate container, mix the clay with a couple of teaspoons of distilled water and set it aside for later. step 2: follow the steps above (for the no thrills lard soap) until you reach trace (step 7). once you have reached trace, stir in the clay followed by the essential oil. The lye and water mixture will be very hot, so use a sturdy container and stay upwind if you can. we use half gallon mason jars to mix lye and water. melt the fats in a large stock pot on the stove at the same time, and let both cool to about 90 100 degrees before slowly pouring the lye water into the melted fat.
A Basic Lard Soap Recipe That Looks Great To cure the soap, leave the molds in a cool, dry place for about four to six weeks. during this time, the soap will continue to harden and lose excess moisture, resulting in a long lasting bar of soap. it is important to note that the longer the soap cures, the better the quality and performance. Weigh your caustic soda according to the recipe from the soap calculator. melt the lard in a pot on the stove until it reaches between 37°c and 51°c. in a well ventilated area, add the weighed caustic soda lye to the water, stirring as you add it. let the lye mixture cool until it too reaches between 37°c and 51°c. Measure out the distilled water and place it in your bowl in the sink. measure out the lye. with a window open or ventilation, and working in the sink, slowly add the lye to the water, stirring with the fork as you add it. allow the lye to cool for about 30 40 minutes or until it reaches 100 110f. Once the fats and oils are melted, set the saucepan aside to cool along with the lye. once the lye and the fats are cooled to approximately 115 degrees or within ten degrees of each other, you can then mix them together. slowly pour the lye into the fats. using the immersion blender, mix the ingredients together.
Comments are closed.