Mercruiser Cool Fuel Module Youtube In the video i’m restoring the fuel injection cool fuel module on a mercruiser 6.2 engine. the cool fuel module contains a fuel pump, a fuel to water heat ex. 6. install the supplied hose clamps on the large cooling hoses and attach to the new orifice meter assembly, if replacing. 7. install the supplied hose clamps on the water hoses of the orifice meter assembly and connect the hoses to the inlet and outlet barbed fittings on the gen iii cool fuel module. 8.
Mercruiser Cool Fuel System 7) unbolt the pump from the motor mount. it is held in place with 2 nuts, 9 16" hex heads. 8) drag the whole apparatus, fuel lines and fuel filter out of the boat. 9) remove the pump and cooler assembly from the housing making sure to not get any white heat dissipating grease on your skin, it burns like bad things. Replacement kits complete gen iii module with pumps and filter 8m0047215. if you have 3 hoses coming from the supply hose coming out of the supply hose, you also need. three bib hose kit 865208t02. view attachment 30501. good news is that the new pump kit has a drain plug that is actually accesible,. All the cool fuels have their own issues over time. and of course the older vst had its own issues. edit you do have the gen 3 cool fuel. issues will be the complete fuel system will have paint peeling. i gave out the wrong answer above being a gen 2 cool fuel. i think i was off 667 engines. 41,557. jun 27, 2017. #2. blackened plugs is a over rich fuel mixture which can not be caused by the pump. the pump can output 60 psi pressure but only happens if something else fails like the fuel pressure regulator or a clog in the return system. other causes of black plugs is the map sensor, clogged flame arrestor, tps or vacuum leak.
S J Complete Marine Top Cap And Regulator Replacement On Mercruiser All the cool fuels have their own issues over time. and of course the older vst had its own issues. edit you do have the gen 3 cool fuel. issues will be the complete fuel system will have paint peeling. i gave out the wrong answer above being a gen 2 cool fuel. i think i was off 667 engines. 41,557. jun 27, 2017. #2. blackened plugs is a over rich fuel mixture which can not be caused by the pump. the pump can output 60 psi pressure but only happens if something else fails like the fuel pressure regulator or a clog in the return system. other causes of black plugs is the map sensor, clogged flame arrestor, tps or vacuum leak. After our attempted sea trial of our 2006 meridian 341 with 6.2 mercruiser mx horizon engines failed, we ripped out the leaking fitting from the cool fuel mo. Mercruiser 8m0047215 bravo gen iii cool fuel pump module service kit complete. this cool fuel supply module replacement kit contains: 1 gen iii cool fuel module assembly. 2 plastic barbed hose connector fittings (3 8 18) #22 8m2010476. 1 adapter, hex 3 8" #88517.
Mercruiser Cool Fuel Module Saanich Victoria After our attempted sea trial of our 2006 meridian 341 with 6.2 mercruiser mx horizon engines failed, we ripped out the leaking fitting from the cool fuel mo. Mercruiser 8m0047215 bravo gen iii cool fuel pump module service kit complete. this cool fuel supply module replacement kit contains: 1 gen iii cool fuel module assembly. 2 plastic barbed hose connector fittings (3 8 18) #22 8m2010476. 1 adapter, hex 3 8" #88517.
Comments are closed.