Nissan D21 Engine Swap

nissan d21 Truck With A Turbo Vq30det V6 вђ engine swap Depot
nissan d21 Truck With A Turbo Vq30det V6 вђ engine swap Depot

Nissan D21 Truck With A Turbo Vq30det V6 вђ Engine Swap Depot Car: nissan 720,nissan d21 hardbody. re: what fits? (direct engine swaps) post by 720 » thu aug 23, 2012 5:47 pm. ka24et,ka24det,sr20det, pretty much any inline 4 but the real issue is wiring and mounts but anything can be achieved, when i swapped a ka24e into my truck i just used the hardbody tranny and wiring modified to fit in the 720 body. So far parts needed. 1. new oil pan fab. 2. motor mounts. 3. mod brackets holding trans to engine. 4. ecu and harness for ka24de of engine useing. 5. fuel pump. 6 mod exhaust. turbo or non turbo. 7. mod power steering hoses and location of reservoir. 8. starter for ka24de.

nissan D21 Engine Swap Kit
nissan D21 Engine Swap Kit

Nissan D21 Engine Swap Kit Generation iii. the vortec 5300, or lm7 l59 lm4 l33, is a v8 truck engine. it is a stroked (by 9 mm) version of the vortec 4800 and replaced the 5700 l31. l59 denoted a flexible fuel version of the standard fuel lm7 engine. power output is 270 305 hp (313 320 kw) and torque is 315 lb·ft (427 n·m) to 335 lb·ft (454 n·m). Tdi. tdi nissan hardbody project, 01 jetta donor car. jan 28, 2018. #1. hello fellow engine swapers. my name is jason. this thread is going to be about taking the weezy ka24e out of my 1997 nissan hardbody 4x4 and putting in a beast of an alh tdi. i had been thinking about and researching doing this for at least a year and a half before finally. The truck ka24de drops right in, if you use a 240 motor, its higher compression and has a front sump oil pan which has to be converted to rear. the truck motor would be better for turbo since it has like 8.5 compression stock 240 motor is 9.5. i used the truck motor mounts and motor mount brackets, everything was pretty easy. 1993 nissan d21 engine swap ideas. speculation. i have a 1993 nissan hardbody with 220k miles. the thing is practically rust free and in great shape. i recently discovered that have a bad head gasket in my little 4 cylinder. i am looking to swap it out and gain some power. i was looking in to a vg33e out of a frontier xterra and i would turbo it.

Comments are closed.