Pop Up Tutorial 8 Adding Small 3d Pieces Onto Pop This tutorial explains easy ways to add small 3d pieces to simple pop up mechanisms in order to extend and develop designs. these extra pieces can be quite l. 1 parallel fold (06, 09, 14, 26) the most common and classic technique that creates layers and extra angles to work with. it can be used in 90 and 180 degrees (opened) pop ups. in a 90 degree design, it can be used to add layers to a scene while used in a 180 degrees pop up, it creates an extended fold that moves along with the centerfold.
How To Make A Pop Up Card 3d Card Youtube This tutorial explains how to make a range of pop up shapes from very simple cylinders or rectangles to elegant flower designs. Pop up tutorial 7 adding extra creases to basic pop up shapes part 1 17:42 pop up tutorial 8 adding small 3d pieces onto pop up shapes. Fold your card (or paper) in half. measure where the center line is (shown in red on the diagram). you don't need to mark this out unless you want to (in pencil). it doesn't have to be exact. cut horizontally across the card from the folded edge to the center line. do this wherever you want the pop up positioned. 5. cut out the designated lines of the template. follow the lines on the template to cut the cardstock for the pop up shape. cut the vertical lines at the bottom first, then move on to the outline of the shape. be precise: this is the shape that’s going to be displayed when you open up the card.
Comments are closed.