Sbc Cylinder Head Valve Seal Install And Spring Assembly Youtube Installing new valve seals on a sbc 882 cylinder head and then installing the valve springs. intake seal pn: ss 72527exhaust seal pn: ss 72526. How to install valve springs, retainers, valve seals, and keepers. this is definitely not a first ever type of process, but it is an important step in assemb.
How To Install Valve Seals On Sbc Heads 6 Some Quick Tips How to install valve and valve springs valve seals on small black chevy 350 sbc. Install a compression tester to #1 cylinder and bring the engine up to tdc. install a compression tester to #6 cylinder and bring the engine up to tdc. adjust each valve until all valve lash is eliminated and then turn the adjusting nut clockwise ¾ turn. install oil stoppers deflectors on the rocker arms. Mostly for insurance and a selling point. .520 is the most common guide od to use with an 11 32 valve stem. i think a .580 is available but may not clear the damper spring. i haven’t done this work in a long time and unfortunately don’t have a good brand to recommend. seems everything has gone down hill. The gen iii small block has already moved to an 8 mm (0.313 inch) valve stem, in comparison to the standard small block 11 32 inch (0.343) valve stem. while this is only a 0.030 inch change, it does contribute to reducing valve weight, which reduces the necessity for higher load valve springs and produces less abuse on the valve.
Install 2 Valve Springs On A Sbc Procomp Aluminum Head Youtube Mostly for insurance and a selling point. .520 is the most common guide od to use with an 11 32 valve stem. i think a .580 is available but may not clear the damper spring. i haven’t done this work in a long time and unfortunately don’t have a good brand to recommend. seems everything has gone down hill. The gen iii small block has already moved to an 8 mm (0.313 inch) valve stem, in comparison to the standard small block 11 32 inch (0.343) valve stem. while this is only a 0.030 inch change, it does contribute to reducing valve weight, which reduces the necessity for higher load valve springs and produces less abuse on the valve. From so. cal. compress the valve spring all the way and lock into the down position. (it will lock on its own) <o< oremove the two valve retainers from the top of the valve, release he tool from the lock position slowly, and rotate out of the way.<o< o. remove the entire valve spring. Bring piston number 7 up to tdc with both valves closed and remove springs. the valves won,t drop into the cylinder as long as the piston stays up. try and check for valve side play or guide wear replace seals on that cylinder and re run. i would use some type of postive seal any clearance over .004 is to much.
How To Change Sbc Valve Springs With The Heads On Youtube From so. cal. compress the valve spring all the way and lock into the down position. (it will lock on its own) <o< oremove the two valve retainers from the top of the valve, release he tool from the lock position slowly, and rotate out of the way.<o< o. remove the entire valve spring. Bring piston number 7 up to tdc with both valves closed and remove springs. the valves won,t drop into the cylinder as long as the piston stays up. try and check for valve side play or guide wear replace seals on that cylinder and re run. i would use some type of postive seal any clearance over .004 is to much.
Comments are closed.