Yamaha Bear Tracker With No Spark Part 2 Youtube Alright, alright i found a new pickup coil that was in spec and finally got some spark. be sure to verify the spec of the coil from the manufacturer or se. What i got is a 2001 yamaha bear tracker 250, got it as a project on trade and the problem i’m dealing with is a “no spark” problem and been trying to hunt down the cause for two weeks. i’ve replaced the stator, pick up coil, cdi, wiring harness, ignition, coil pack, spark plug, solenoid, battery , etc. and i’m still not getting any luck.
How To Troubleshoot No Spark Or Weak Spark On Yamaha Big Bear With Ful However, the thing has no spark what so ever. i've check continuity through the start button and it shows the contact is working, ohmed out the stator, everything is in spec, the reg rec tested fine as well. i've replaced the solenoid on the off chance it could've been bad and the cdi unit as well, along the the little solenoid relay unit. Take a tester or a test light and see if any of the small wires on that relay have power with the key on. one should have power. expose the ignition switch (key) wiring at the back and test them for power. one of the wires should have power. start with that. Atv forums by brand. yamaha atv forum. 99 00 bear tracker 250 no spark. so i have a yamaha bear tracker 250. ice replaced the ignition coil, pickup coil, cdi box, spark plug, neutral safety switch and kill switch are good. battery and ground are good. but still no spark. Just got this free yamaha bear tracker 230. has no spark, i changed the stator made no difference. i tested the stator with my multimeter and found that the new one is out of spec which makes no sense. checked all the wires on the quad that would make it spark and found that there is no resistanc.
Comments are closed.